Bearings, units and housings -- Super-precision bearings -- Angular contact ball bearings -- Angular contact ball bearings, super-precision -- SKF 7008 ACB/HCP4AL
7008 ACB/HCP4AL
Dimensions
| d | 40 | mm | |
| D | 68 | mm | |
| B | 15 | mm | |
| d1 | 50.95 | mm | |
| d2 | 49.87 | mm | |
| D2 | 58.88 | mm | |
| b | 1.5 | mm | |
| C1 | 7.8 | mm | |
| C2 | 3.6 | mm | |
| C3 | 2.6 | mm | |
| r1,2 | min. | 1 | mm |
| r3,4 | min. | 0.6 | mm |
| a | 20.2 | mm |
Abutment dimensions
| da | min. | 44.6 | mm |
| db | min. | 44.6 | mm |
| Da | max. | 63.4 | mm |
| Db | max. | 64.8 | mm |
| ra | max. | 1 | mm |
| rb | max. | 0.6 | mm |
| dn | 51.6 | mm |
Calculation data
| Basic dynamic load rating | C | 9.36 | kN | |
| Basic static load rating | C0 | 8.65 | kN | |
| Fatigue load limit | Pu | 0.224 | kN | |
| Attainable speed for grease lubrication | 32000 | r/min | ||
| Attainable speed for oil-air lubrication | 48000 | r/min | ||
| Ball diameter | Dw | 4.762 | mm | |
| Number of balls | z | 26 | ||
| Reference grease quantity | Gref | 2.22 | cm³ | |
| Preload and stiffness (back-to-back, face-to-face) | ||||
| Preload class A | GA | 41 | N | |
| Static axial stiffness, preload class A | 80 | N/µm | ||
| Preload class B | GB | 82 | N | |
| Static axial stiffness, preload class B | 102 | N/µm | ||
| Preload class C | GC | 245 | N | |
| Static axial stiffness, preload class C | 153 | N/µm | ||
| Calculation factors | ||||
| Calculation factor | f | 1.04 | ||
| Calculation factor | f1 | 0.99 | ||
| Calculation factor | f2A | 1 | ||
| Calculation factor | f2B | 1.02 | ||
| Calculation factor | f2C | 1.05 | ||
| Calculation factor | fHC | 1.01 | ||
| Calculation factor | e | 0.68 | ||
| Calculation factor (single, tandem) | Y2 | 0.87 | ||
| Calculation factor (single, tandem) | Y0 | 0.38 | ||
| Calculation factor (single, tandem) | X2 | 0.41 | ||
| Calculation factor (back-to-back, face-to-face) | Y1 | 0.92 | ||
| Calculation factor (back-to-back, face-to-face) | Y2 | 1.41 | ||
| Calculation factor (back-to-back, face-to-face) | Y0 | 0.76 | ||
| Calculation factor (back-to-back, face-to-face) | X2 | 0.67 | ||
Mass
| Mass bearing | 0.2 | kg |