Bearings, units and housings -- Super-precision bearings -- Angular contact ball bearings -- Angular contact ball bearings, super-precision -- SKF 707 CE/P4AH
707 CE/P4AH
Dimensions
| d | 7 | mm | |
| D | 19 | mm | |
| B | 6 | mm | |
| d1 | 10.4 | mm | |
| d2 | 9.9 | mm | |
| D1 | 15.7 | mm | |
| K | 0.5 | mm | |
| C1 | 3.65 | mm | |
| r1,2 | min. | 0.3 | mm |
| r3,4 | min. | 0.15 | mm |
| a | 4.8 | mm |
Abutment dimensions
| da | min. | 9 | mm |
| db | min. | 9 | mm |
| Da | max. | 17 | mm |
| Db | max. | 17.6 | mm |
| ra | max. | 0.3 | mm |
| rb | max. | 0.15 | mm |
| dn | 11.4 | mm |
Calculation data
| Basic dynamic load rating | C | 1.95 | kN | |
| Basic static load rating | C0 | 0.64 | kN | |
| Fatigue load limit | Pu | 0.027 | kN | |
| Attainable speed for grease lubrication | 127000 | r/min | ||
| Attainable speed for oil-air lubrication | 190000 | r/min | ||
| Ball diameter | Dw | 3.572 | mm | |
| Number of balls | z | 8 | ||
| Reference grease quantity | Gref | 0.11 | cm³ | |
| Preload and stiffness (back-to-back, face-to-face) | ||||
| Preload class A | GA | 10 | N | |
| Static axial stiffness, preload class A | 8 | N/µm | ||
| Preload class B | GB | 30 | N | |
| Static axial stiffness, preload class B | 13 | N/µm | ||
| Preload class C | GC | 60 | N | |
| Static axial stiffness, preload class C | 18 | N/µm | ||
| Calculation factors | ||||
| Calculation factor | f | 1.02 | ||
| Calculation factor | f1 | 1 | ||
| Calculation factor | f2A | 1 | ||
| Calculation factor | f2B | 1.03 | ||
| Calculation factor | f2C | 1.05 | ||
| Calculation factor | fHC | 1 | ||
| Calculation factor | f0 | 6.5 | ||
Mass
| Mass bearing | 0.007 | kg |