Bearings, units and housings -- Super-precision bearings -- Angular contact ball bearings -- Angular contact ball bearings, super-precision -- SKF 71905 CE/P4AL
71905 CE/P4AL
Dimensions
| d | 25 | mm | |
| D | 42 | mm | |
| B | 9 | mm | |
| d1 | 30.7 | mm | |
| d2 | 29.4 | mm | |
| D1 | 36.39 | mm | |
| b | 1.5 | mm | |
| C1 | 4.6 | mm | |
| C2 | 1.4 | mm | |
| C3 | 0.9 | mm | |
| r1,2 | min. | 0.3 | mm |
| r3,4 | min. | 0.15 | mm |
| a | 9.2 | mm |
Abutment dimensions
| da | min. | 27 | mm |
| db | min. | 27 | mm |
| Da | max. | 40 | mm |
| Db | max. | 41.2 | mm |
| ra | max. | 0.3 | mm |
| rb | max. | 0.15 | mm |
| dn | 31.8 | mm |
Calculation data
| Basic dynamic load rating | C | 5.27 | kN | |
| Basic static load rating | C0 | 2.85 | kN | |
| Fatigue load limit | Pu | 0.12 | kN | |
| Attainable speed for grease lubrication | 49000 | r/min | ||
| Attainable speed for oil-air lubrication | 75000 | r/min | ||
| Ball diameter | Dw | 4.762 | mm | |
| Number of balls | z | 16 | ||
| Reference grease quantity | Gref | 0.6 | cm³ | |
| Preload and stiffness (back-to-back, face-to-face) | ||||
| Preload class A | GA | 28 | N | |
| Static axial stiffness, preload class A | 20 | N/µm | ||
| Preload class B | GB | 85 | N | |
| Static axial stiffness, preload class B | 32 | N/µm | ||
| Preload class C | GC | 170 | N | |
| Static axial stiffness, preload class C | 44 | N/µm | ||
| Calculation factors | ||||
| Calculation factor | f | 1.06 | ||
| Calculation factor | f1 | 1 | ||
| Calculation factor | f2A | 1 | ||
| Calculation factor | f2B | 1.04 | ||
| Calculation factor | f2C | 1.08 | ||
| Calculation factor | fHC | 1 | ||
| Calculation factor | f0 | 8.1 | ||
Mass
| Mass bearing | 0.04 | kg |