| Housing material | Cast iron | |||


| d | 38.1 | mm | |
| A | 38.5 | mm | |
| A1 | 14 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 26 | mm | |
| B1 | 56.3 | mm | |
| Da | H11 | 115.9 | mm |
| Db1 | 98 | mm | |
| Db2 | 106 | mm | |
| J | 101.5 | mm | |
| L | 130 | mm | |
| N | 14 | mm | |
| s1 | 34.9 | mm | |
| T | 58.9 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 25.5 | mm | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 118 | mm | |
| J7 | 34 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 30.7 | kN | |
| Basic static load rating | C0 | 19 | kN | |
| Fatigue load limit | Pu | 0.8 | kN | |
| Limiting speed | 4800 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 1.95 | kg |
| Thread grub screw | G2 | 3/8-24 UNF | ||
| Hexagonal key size for grub screw | N | 4.763 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 12 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5 | in | |
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 1055x1100x25 HS5 D | ||||
|---|---|---|---|---|
| 524364 | ||||
| FSAF 1617 x 3 | ||||
| SAW 23528 x 4.13/16 | ||||
| SSAFS 23056 KATLC x 9.15/16 |
Hot number:
467x510x20 HDS2 V
51264 M
6312
NJ 307 ECP
NJ 348 MA
PBM 152220 M1G1
PRMF 455045
PF 20 FM
RN-5x19.8 BF/G2
RNAO 55x68x20
SAF 1618 x 3.1/8 T
SAF 22624 x 4.1/4 TLC
SNL 3180
W 61806 R
WS 81126
Previous:FY 1.1/2 WDW Bearings, units and housings ---- Next:FY 1.1/4 FM Bearings, units and housings
Return to SKF bearing