| Housing material | Cast iron | |||


| d | 42.863 | mm | |
| A | 39 | mm | |
| A1 | 14 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 26.5 | mm | |
| B1 | 43.7 | mm | |
| Da | H11 | 119.1 | mm |
| Db1 | 102 | mm | |
| Db2 | 112 | mm | |
| J | 105 | mm | |
| L | 137 | mm | |
| N | 16 | mm | |
| s1 | 32.7 | mm | |
| T | 56.7 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 24.5 | mm | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 123 | mm | |
| J7 | 33.5 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 33.2 | kN | |
| Basic static load rating | C0 | 21.6 | kN | |
| Fatigue load limit | Pu | 0.915 | kN | |
| Limiting speed | 4300 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 2.05 | kg |
| Thread grub screw | G2 | 3/8-24 UNF | ||
| Hexagonal key size for grub screw | N | 4.763 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 14 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5625 | in | |
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 52226 | ||||
|---|---|---|---|---|
| BTM 120 ATN9/P4CDB | ||||
| S71911 ACB/P4A | ||||
| W 6008-2RS1/VP311 | ||||
| SY 2.7/16 TF |
Hot number:
23264 CCK/W33 + AOH 3264 G
30x56x8 CRW1 R
31177
3209 A-2ZTN9/MT33
42475
6208/HR11TN
626-RSH
7007 CE/P4AL
71919 ACE/P4A
7214 ACD/HCP4A
AOHX 31/500 G
BD-C 3044 K-OH 3044 H
FSAF 1611 x 1.7/8 T
NUP 314 ECM
PSMF 121808 A51
Previous:FY 1.11/16 DTF Bearings, units and housings ---- Next:FY 1.11/16 LDW Bearings, units and housings
Return to SKF bearing