| Housing material | Cast iron | |||


| d | 25 | mm | |
| A | 30 | mm | |
| A1 | 12 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 18 | mm | |
| B1 | 31 | mm | |
| Da | H11 | 74.6 | mm |
| Db1 | 65 | mm | |
| Db2 | 71 | mm | |
| J | 70 | mm | |
| L | 95 | mm | |
| N | 11.5 | mm | |
| s1 | 23.5 | mm | |
| T | 42.5 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 21 | mm | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 83 | mm | |
| J7 | 19 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 14 | kN | |
| Basic static load rating | C0 | 7.8 | kN | |
| Fatigue load limit | Pu | 0.335 | kN | |
| Limiting speed | 7000 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 0.7 | kg |
| Thread grub screw | G2 | M6x0.75 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 10 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.375 | in | |
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 32224 | ||||
|---|---|---|---|---|
| 71932 ACD/HCP4AH1 | ||||
| BD-C 3088 KMB-OH 3088 HE | ||||
| GEZM 308 ES-2RS | ||||
| NK 21/20 |
Hot number:
24124 CCK30/W33 + AH 24124
33645
470671
522677
527806
618/630 MA
950 VRME R
AH 2338 G
C 3164 KM
IR 15x19x20
HE 3036
N 800
PCM 11512050 M
PWM 110125100
YET 205
Previous:FY 20 WDW Bearings, units and housings ---- Next:FY 25 LDW Bearings, units and housings
Return to SKF bearing