| Housing material | Cast iron | |||


| d | 40 | mm | |
| A | 38.5 | mm | |
| A1 | 14 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 23.5 | mm | |
| B1 | 43.7 | mm | |
| Da | H11 | 115.9 | mm |
| Db1 | 98 | mm | |
| Db2 | 106 | mm | |
| J | 101.5 | mm | |
| L | 130 | mm | |
| N | 14 | mm | |
| s1 | 33.2 | mm | |
| T | 57.2 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 25.5 | mm | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 118 | mm | |
| J7 | 34 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 30.7 | kN | |
| Basic static load rating | C0 | 19 | kN | |
| Fatigue load limit | Pu | 0.8 | kN | |
| Limiting speed | 4800 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 1.8 | kg |
| Thread grub screw | G2 | M10x1 | ||
| Hexagonal key size for grub screw | N | 5 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 12 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5 | in | |
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 29112 | ||||
|---|---|---|---|---|
| 6373 | ||||
| 99376 | ||||
| SILQG 12 ESA | ||||
| Z 212 |
Hot number:
12x32x7 HMS5 V
17x37x7 HMSA10 RG
BD-23144 CCK/W33-AOH 3144
28x38x8 HMSA10 RG
313839
470441
61912-2RS1
650 VE R
7020 CB/P4A
71911 ACD/P4A
AS 2542
BT2B 334030/HA1
SAF 1315
SAW 23228 TLC
TUWK 30 LTA
Previous:FY 35 WF Bearings, units and housings ---- Next:FY 40 LDW Bearings, units and housings
Return to SKF bearing