| Housing material | Cast iron | |||


| d | 60 | mm | |
| A | 52 | mm | |
| A1 | 17 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 35.5 | mm | |
| B1 | 53.1 | mm | |
| Da | H11 | 161.9 | mm |
| Db1 | 130 | mm | |
| Db2 | 143 | mm | |
| J | 143 | mm | |
| L | 175 | mm | |
| N | 18 | mm | |
| s1 | 40.1 | mm | |
| T | 74.1 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 34.5 | mm | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 161 | mm | |
| J7 | 49.5 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 52.7 | kN | |
| Basic static load rating | C0 | 36 | kN | |
| Fatigue load limit | Pu | 1.53 | kN | |
| Limiting speed | 3400 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 3.8 | kg |
| Thread grub screw | G2 | M10x1 | ||
| Hexagonal key size for grub screw | N | 5 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 16 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.625 | in | |
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 2219 K + H 319 | ||||
|---|---|---|---|---|
| 230/530 CAK/W33 | ||||
| H 310 | ||||
| PWKR 40.2RS | ||||
| TUWK 505 L |
Hot number:
13054
28270
3305 A-2ZTN9/MT33
330x370x20 HDS2 R
51118
6017-RS1
AOH 240/670 G
BC2B 322969/HB1
D/W RW166 R
HJ 2328 EC
IR 32x40x36
LR 20x25x16.5
SAFS 22518-11 x 3.1/4
SYF 30 FM
WS 81138
Previous:FY 55 WF Bearings, units and housings ---- Next:FY 60 LF Bearings, units and housings
Return to SKF bearing