|
||||
| Housing material | Cast iron | |||


| d | 60 | mm | |
| A | 50 | mm | |
| A1 | 22 | mm | |
| A3 | H14 | 3.2 | mm |
| B1 | 65 | mm | |
| Da | H11 | 161.9 | mm |
| Db1 | 150 | mm | |
| Db2 | 152 | mm | |
| J | 149 | mm | |
| L | 187 | mm | |
| N | 19 | mm | |
| s1 | ≈ | 35.4 | mm |
| T | 65.4 | mm | |
|
Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 29.5 | mm | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 169 | mm | |
| J7 | 50.5 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 57.2 | kN | |
| Basic static load rating | C0 | 40 | kN | |
| Fatigue load limit | Pu | 1.7 | kN | |
| Limiting speed | 3000 | r/min |
| Mass bearing unit | 5.25 | kg |
| Appropriate spanner | HN 12-13 | |||
| Recommended lock nut tightening angle | a | 100 | ° | |
| Recommended diameter for attachment bolts, mm | G | 16 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.625 | in | |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 4304 ATN9 | ||||
|---|---|---|---|---|
| 86841 | ||||
| 99192 | ||||
| FNL 506 B | ||||
| S71911 CE/P4A |
Hot number:
16072 MA
31261
315071 A
401806
7030 CD/P4A
7200 ACD/P4A
728 ACD/P4A
BC2B 320118
FY 2.15/16 TF/VA201
NATR 35 PPA
NJ 202 ECP
NU 2212 ECML
NU 407
SSAFS 23026 KATLC x 4.7/16
T3FE 075
Previous:FYJ 60 TF Bearings, units and housings ---- Next:FYJ 65 TF Bearings, units and housings
Return to SKF bearing