| Housing material | Cast iron | |||


| d | 12.7 | mm | |
| A | 26 | mm | |
| A1 | 11 | mm | |
| A3 | H14 | 3.2 | mm |
| B1 | 28.6 | mm | |
| B4 | 4.75 | mm | |
| Da | H11 | 50.8 | mm |
| Db1 | 50 | mm | |
| Db2 | 57 | mm | |
| J | 76.5 | mm | |
| H | 98.5 | mm | |
| L | 57 | mm | |
| N | 11.5 | mm | |
| s1 | 22.1 | mm | |
| T | 39.1 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 19 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 61.5 | mm | |
| J7 | 11 | mm | |
| N4 | 2 | mm | |
| Basic dynamic load rating | C | 9.56 | kN | |
| Basic static load rating | C0 | 4.75 | kN | |
| Fatigue load limit | Pu | 0.2 | kN | |
| Limiting speed | 9500 | r/min |
(with shaft tolerance h6)
| Thread grub screw | G2 | 1/4-28 UNF | ||
| Hexagonal key size for grub screw | N | 3.175 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 10 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.375 | in | |
| Housing | ||||
| Bearing | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 130 VA V | ||||
|---|---|---|---|---|
| 26299 | ||||
| 305701 C-2RS1 | ||||
| 590x630x20 HDS1 R | ||||
| 89424 M |
Hot number:
14035
18x40x7 HMS5 V
38x58x10 HMS5 RG
410603
45x75x8 CRW1 V
AOH 30/950
FSNL 528
FYR 2 1/2-3
NA 49/32
NCF 2918 CV
NNCL 4972 CV
S71919 CD/P4A
SYE 1 11/16-3
W 617/4 R
W 6209-2Z
Previous:FYTB 1.7/16 WDW Bearings, units and housings ---- Next:FYTB 1/2 RM Bearings, units and housings
Return to SKF bearing