| Housing material | Cast iron | |||


| d | 38.1 | mm | |
| A | 38.5 | mm | |
| A1 | 14 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 26 | mm | |
| B | 36 | mm | |
| B4 | 7 | mm | |
| Da | H11 | 88.9 | mm |
| Db1 | 98 | mm | |
| Db2 | 102 | mm | |
| J | 143.5 | mm | |
| H | 171.5 | mm | |
| L | 102 | mm | |
| N | 14 | mm | |
| s1 | 25.3 | mm | |
| T | 49.3 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 24.5 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 115.5 | mm | |
| J7 | 16 | mm | |
| N4 | 2 | mm | |
| Basic dynamic load rating | C | 30.7 | kN | |
| Basic static load rating | C0 | 19 | kN | |
| Fatigue load limit | Pu | 0.8 | kN | |
| Limiting speed | 4800 | r/min |
(with shaft tolerance h6)
| Thread grub screw | G2 | 5/16-24 UNF | ||
| Hexagonal key size for grub screw | N | 3.969 | mm | |
| Recommended tightening torque for grub screw | 6.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 12 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5 | in | |
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 11390 | ||||
|---|---|---|---|---|
| BD-22230 CCK/W33-AHX 3130 G | ||||
| 99721 | ||||
| NATR 15 | ||||
| PCZ 3224 M |
Hot number:
100x145x12 HMSA10 V
12655
21763
340x380x18 HDS1 R
401101
9x22x7 HMS5 V
BC4B 319411
C 3076 M
C 2317
HK 2010
HJ 2215 EC
NU 18/1700 ECMA/HB1
NU 309 ECM
SAW 23518 x 3.1/8 T
SY 1.1/4 LDW
Previous:FYTB 1.1/2 LDW Bearings, units and housings ---- Next:FYTB 1.1/2 TDW Bearings, units and housings
Return to SKF bearing