| Housing material | Cast iron | |||


| d | 50.8 | mm | |
| A | 47 | mm | |
| A1 | 16 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 29.5 | mm | |
| B | 45 | mm | |
| B4 | 9 | mm | |
| Da | H11 | 111.6 | mm |
| Db1 | 118 | mm | |
| Db2 | 127 | mm | |
| J | 184 | mm | |
| H | 216 | mm | |
| L | 127 | mm | |
| N | 18 | mm | |
| s1 | 32.5 | mm | |
| T | 63.5 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 31.5 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 154 | mm | |
| J7 | 18 | mm | |
| N4 | 2 | mm | |
| Basic dynamic load rating | C | 43.6 | kN | |
| Basic static load rating | C0 | 29 | kN | |
| Fatigue load limit | Pu | 1.25 | kN | |
| Limiting speed | 3600 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 2.7 | kg |
| Thread grub screw | G2 | 3/8-24 UNF | ||
| Hexagonal key size for grub screw | N | 4.763 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 16 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.625 | in | |
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 100051 | ||||
|---|---|---|---|---|
| 524222 | ||||
| 65x95x10 HMS5 V | ||||
| IR 70x80x54 | ||||
| SIL 35 TXE-2LS |
Hot number:
15x25x6 HMS5 V
16x30x7 CRW1 R
22326-2CS5K/VT143
BD-239/800 CAK/W33-OH 39/800 H
36363
618/710 M
7214 BEGAF
90x110x10 HMS5 V
AH 24128
FSAF 23024 KATLC x 4.3/16
FYTB 25 WDW
HM 3072
PBMF 21023080 M1G1
SD 25x32x4
SNL 615 TURU
Previous:FYTB 2. FM Bearings, units and housings ---- Next:FYTB 2.3/16 FM Bearings, units and housings
Return to SKF bearing