| Housing material | Cast iron | |||


| d | 35 | mm | |
| d2 | 57 | mm | |
| A | 34.5 | mm | |
| A1 | 13 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 22 | mm | |
| B1 | 39.5 | mm | |
| Da | H11 | 88.9 | mm |
| Db1 | 88 | mm | |
| Db2 | 96 | mm | |
| J | 130 | mm | |
| H | 156 | mm | |
| L | 96 | mm | |
| N | 14 | mm | |
| s1 | 24.3 | mm | |
| T | 45.3 | mm | |
|
Values for B1 and s1 before the grub screw is tightened (sleeve and inner ring bore at starting position). |
|||
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 22 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 106 | mm | |
| J7 | 15 | mm | |
| N4 | 2 | mm | |
| Basic dynamic load rating | C | 25.5 | kN | |
| Basic static load rating | C0 | 15.3 | kN | |
| Fatigue load limit | Pu | 0.655 | kN | |
| Limiting speed | 5300 | r/min |
| Mass bearing unit | 1.2 | kg |
| Thread grub screw | G2 | M6 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 7.4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 12 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5 | in | |
| Appropriate SKF mounting kit | 626830 | |||
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| BD-23136 CCK/W33-H 3136 | ||||
|---|---|---|---|---|
| 68450/68712 | ||||
| C 3030 MB | ||||
| NUTR 30 X | ||||
| W 6002-2Z |
Hot number:
120x140x12 HMS5 V
25587
330824 A
6006-2Z/VA208
99850
920x984x25 HDS2 V
99571
AH 24128
BT1-8003/HA1
BD-C 3160 K-OH 3160 H
KMT 12
N 080
NJG 2306 VH
OKCX 880
SY 1. TF
Previous:FYTB 35 LDW Bearings, units and housings ---- Next:FYTB 35 TDW Bearings, units and housings
Return to SKF bearing