| Housing material | Cast iron | |||


| d | 45 | mm | |
| A | 39 | mm | |
| A1 | 14 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 23 | mm | |
| B1 | 43.7 | mm | |
| B4 | 6.75 | mm | |
| Da | H11 | 98.4 | mm |
| Db1 | 102 | mm | |
| Db2 | 111 | mm | |
| J | 148.5 | mm | |
| H | 178.5 | mm | |
| L | 111 | mm | |
| N | 16 | mm | |
| s1 | 32.7 | mm | |
| T | 56.7 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 24.5 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 120.5 | mm | |
| J7 | 18 | mm | |
| N4 | 2 | mm | |
| Basic dynamic load rating | C | 33.2 | kN | |
| Basic static load rating | C0 | 21.6 | kN | |
| Fatigue load limit | Pu | 0.915 | kN | |
| Limiting speed | 4300 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 1.75 | kg |
| Thread grub screw | G2 | M10x1 | ||
| Hexagonal key size for grub screw | N | 5 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 14 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5625 | in | |
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| BT4B 334051 G/HA1VA901 | ||||
|---|---|---|---|---|
| NCF 3005 CV | ||||
| NU 2292 MA | ||||
| SSAFS 22538 | ||||
| WS 89417 |
Hot number:
120 VS V
110x150x12 HMS5 V
59172 F
7024 CB/HCP4A
AH 2238 G
L 555249/210
NKIA 5901
NU 1864 ECMP
PCZ 3240 M
S7010 CD/P4A
SI 8 E
SYNT 65 FTF
SYWK 510 L
W 608-2Z
W 619/8-2RZ
Previous:FYTB 40 WDW Bearings, units and housings ---- Next:FYTB 45 LDW Bearings, units and housings
Return to SKF bearing