|
||||
| Housing material | Cast iron | |||


| d | 30 | mm | |
| A | 34 | mm | |
| A1 | 16 | mm | |
| A3 | H14 | 3.2 | mm |
| B1 | 43 | mm | |
| Da | H11 | 88.9 | mm |
| Db1 | 87 | mm | |
| Db2 | 96 | mm | |
| J | 130 | mm | |
| H | 161 | mm | |
| L | 96 | mm | |
| N | 16 | mm | |
| s1 | ≈ | 24.8 | mm |
| T | 43.8 | mm | |
|
Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 20.5 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 106 | mm | |
| J7 | 15 | mm | |
| N4 | 2 | mm | |
| Basic dynamic load rating | C | 25.5 | kN | |
| Basic static load rating | C0 | 15.3 | kN | |
| Fatigue load limit | Pu | 0.655 | kN | |
| Limiting speed | 5300 | r/min |
| Mass bearing unit | 1.3 | kg |
| Appropriate spanner | HN 7 | |||
| Recommended lock nut tightening angle | a | 100 | ° | |
| Recommended diameter for attachment bolts, mm | G | 14 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5625 | in | |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 260x280x16 HMS1 V | ||||
|---|---|---|---|---|
| 4356 | ||||
| 6328 | ||||
| 7007 ACE/P4AL | ||||
| SYJ 20 TF |
Hot number:
1375553
23060 CC/W33
2308 EKTN9
2316 K
30328
402752
48x70x10 HMSA10 V
61948
86546
71914 CE/P4A
7215 CD/HCP4A
HE 3036
PBMF 21023080 M1G1
SAF 23056 KATLC x 10.7/16
SAFS 23038 KAT x 6.7/8
Previous:FYTJ 30 TF Bearings, units and housings ---- Next:FYTJ 35 TF Bearings, units and housings
Return to SKF bearing