|
||||
| Housing material | Cast iron | |||


| d | 40 | mm | |
| A | 38 | mm | |
| A1 | 18 | mm | |
| A3 | H14 | 3.2 | mm |
| B1 | 50 | mm | |
| Da | H11 | 98.4 | mm |
| Db1 | 102 | mm | |
| Db2 | 108 | mm | |
| J | 148 | mm | |
| H | 188 | mm | |
| L | 108 | mm | |
| N | 19 | mm | |
| s1 | ≈ | 29 | mm |
| T | 51 | mm | |
|
Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 23 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 120 | mm | |
| J7 | 18 | mm | |
| N4 | 2 | mm | |
| Basic dynamic load rating | C | 33.2 | kN | |
| Basic static load rating | C0 | 21.6 | kN | |
| Fatigue load limit | Pu | 0.915 | kN | |
| Limiting speed | 4300 | r/min |
| Mass bearing unit | 1.95 | kg |
| Appropriate spanner | HN 8-9 | |||
| Recommended lock nut tightening angle | a | 110 | ° | |
| Recommended diameter for attachment bolts, mm | G | 16 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.625 | in | |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| AOH 24052 G | ||||
|---|---|---|---|---|
| GEZM 208 ES-2LS | ||||
| H 3122 E | ||||
| NA 2203.2RSX | ||||
| NJ 311 ECJ |
Hot number:
1150 VL R
20070
2400560
BD-241/560 ECK30J/W33-AOH 241/560 G
71913 CE/P4A
91385
FSAF 22617 x 2.7/8
GEZ 200 TXE-2LS
NKI 50/35
NU 352 ECMA
NUKRE 62 A
OKTC 585
PCM 11512050 E
SIKB 16 F
W 609-2RS1
Previous:FYTJ 40 TF Bearings, units and housings ---- Next:FYTJ 45 TF Bearings, units and housings
Return to SKF bearing