

| da | 44.45 | mm | |
| Da | 90 | mm | |
| Ca | 29.794 | mm | |
| A1 | 60.325 | mm | |
| A2 | 165.1 | mm | |
| S | 4.763 | mm | |
| ba | 24.606 | mm | |
| H | 121.841 | mm | |
| H1 | 63.5 | mm | |
| H2 | 23.813 | mm | |
| J | min. | 165.1 | mm |
| J | max. | 177.8 | mm |
| L | 209.55 | mm | |
| N1 | 15.875 | mm | |
| Threaded holes | |||
| R1 | 30.163 | mm | |
| R2 | 14.287 | mm | |
| RG | 1/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 28.575 | mm | |
| Housing |
SAF 510
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-10-8
|
|||
| Taconite seal | TER 21 | |||
|
||||
| End plug (suffix Y) |
EPR 4
|
|||
| Max. speed for Taconite seal | 1800 | r/min |

| P60° | 28.9 | kN | |
| P90° | 17.3 | kN | |
| P120° | 11.1 | kN | |
| P150° | 10.1 | kN | |
| P180° | 12.5 | kN | |
| Pa | 2.98 | kN |
| Mass pillow block | 5.9 | kg |
| Cap bolt |
2 x 7/16-14 UNC
|
|||
| Cap bolt recommended tightening torque | 61 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.5 | in | |
| Initial grease fill | 65.205 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 60x80x8 HMSA10 V | ||||
|---|---|---|---|---|
| 7024 CE/P4AL1 | ||||
| N 1022 KTNHA/SP | ||||
| NUP 209 ECML | ||||
| SNW 16x2.3/4 |
Hot number:
127540
23026 CC/W33
33122/DF
6200/HC5C3
6204/HR11QN
6321
80x95x10 HMSA10 V
99196
D/W R4 R-2RS1
LR 25x30x20.5
NU 29/630 ECMA/HB1
SAFS 23026 KATLC x 4.7/16
SYR 1 3/4 N
SAW 23536 x 6.1/2 TLC
W 61901 R-2RZ
Previous:SAF 1510 x 1.3/4 Bearings, units and housings ---- Next:SAF 1510 x 1.5/8 Bearings, units and housings
Return to SKF bearing