

| da | 66.675 | mm | |
| Da | 170 | mm | |
| Ca | 67.793 | mm | |
| A1 | 98.425 | mm | |
| A2 | 233.363 | mm | |
| S | 4.763 | mm | |
| ba | 46.038 | mm | |
| H | 209.55 | mm | |
| H1 | 107.95 | mm | |
| H2 | 44.45 | mm | |
| J | min. | 269.875 | mm |
| J | max. | 320.675 | mm |
| L | 361.95 | mm | |
| N1 | 22.225 | mm | |
| Threaded holes | |||
| R1 | 63.5 | mm | |
| R2 | 26.988 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 42.862 | mm | |
| Housing |
SAF 616
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-19-16
|
|||
| Taconite seal | TER 43 | |||
|
||||
| End plug (suffix Y) |
EPR 8
|
|||
| Max. speed for Taconite seal | 1150 | r/min |

| P60° | 85.9 | kN | |
| P90° | 51.6 | kN | |
| P120° | 32 | kN | |
| P150° | 28.9 | kN | |
| P180° | 34.7 | kN | |
| Pa | 14 | kN |
| Mass pillow block | 29.9 | kg |
| Cap bolt |
2 x 3/4-10 UNC
|
|||
| Cap bolt recommended tightening torque | 515.2 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.75 | in | |
| Initial grease fill | 181.44 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 241/1000 ECAK30F/W33 | ||||
|---|---|---|---|---|
| 40x80x8 HMS5 V | ||||
| 7013 ACE/P4AL | ||||
| K 55x60x20 | ||||
| PRM 859040 |
Hot number:
2310 E-2RS1KTN9 + H 2310
239/900 CA/W33
25x45x8 HMS5 V
32926
6014-2RS1
87901
71245
85x120x12 CRW1 R
90347
KMFE 24 H
NJ 308 ECP
NKIB 5901
NNU 4176 K30M
SNP 3276x13.15/16
W 628-2Z
Previous:SAF 22616 x 2.5/8 Bearings, units and housings ---- Next:SAF 22617 Bearings, units and housings
Return to SKF bearing