Bearings, units and housings -- Bearing housings -- Split pillow blocks, SAF and SAW series (inch dimensions) -- SAF and SAW pillow blocks with bearings on an adapter sleeve -- SKF SAFS 22522
SAFS 22522
Dimensions
| da | 100.013 | mm | |
| Da | 200 | mm | |
| Ca | 62.89 | mm | |
| A1 | 120.65 | mm | |
| A2 | 165.1 | mm | |
| S | 4.763 | mm | |
| ba | 50.006 | mm | |
| H | 244.475 | mm | |
| H1 | 125.425 | mm | |
| H2 | 52.388 | mm | |
| J | min. | 320.675 | mm |
| J | max. | 368.3 | mm |
| J1 | 69.85 | mm | |
| L | 419.1 | mm | |
| N1 | 22.225 | mm | |
| Threaded holes | |||
| R1 | 67.866 | mm | |
| R2 | 31.75 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 45.244 | mm | |
Included products
| Housing |
SAFS 522
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-22-19
|
|||
| Labyrinth ring |
2 x LOR 109
|
|||
|
||||
Associated products
| End plug (suffix Y) |
EPR 13
|
|||
Speed ratings
| Bearing limiting speed | 4000 | r/min |
Recommended safe loads
| P60° | 149 | kN | |
| P90° | 89 | kN | |
| P120° | 55.6 | kN | |
| P150° | 50.7 | kN | |
| P180° | 60.9 | kN | |
| Pa | 17.3 | kN |
Mass
| Mass pillow block | 52.2 | kg |
Mounting information
| Cap bolt |
4 x 3/4-10 UNC
|
|||
| Cap bolt recommended tightening torque | 359.3 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 3/8-16 UNC
|
|||
| Appropriate attachment bolt size | G | 0.75 | in | |
| Initial grease fill | 232.47 | g | ||