Bearings, units and housings -- Bearing housings -- Split plummer block housings, SNL and SE 2, 3, 5 and 6 series -- SNL and SE series for bearings on a cylindrical seat, with standard seals -- SKF SE 209
SE 209
Appropriate products
Dimensions
| da | 45 | mm | |
| db | 55 | mm | |
| Ca | 30 | mm | |
| Da | 85 | mm | |
| Db | 67 | mm | |
| A | 85 | mm | |
| A1 | 60 | mm | |
| H | 109 | mm | |
| H1 | 60 | mm | |
| H2 | 25 | mm | |
| J | 170 | mm | |
| L | 205 | mm | |
| N | 20 | mm | |
| N1 | 15 | mm | |
| Dowel pins | |||
| J6 | 188 | mm | |
| J7 | 22 | mm | |
| N4 | max. | 6 | mm |
| Seal dimensions | |||
| A2L | 97 | mm | |
Appropriate seals and end cover
 TSN 209 A
|  2 x TSN 209 S
|  ASNH 511-609
|
Breaking loads, housing
| P0° | 160 | kN | |
| P55° | 230 | kN | |
| P90° | 140 | kN | |
| P120° | 100 | kN | |
| P150° | 90 | kN | |
| P180° | 115 | kN | |
| Pa | 75 | kN |
Yield point, cap bolts
| Q120° | 150 | kN | |
| Q150° | 85 | kN | |
| Q180° | 75 | kN |
Mass
| Mass housing | 3.2 | kg |
Mounting information
| Cap bolt, size | M 10x55 | |||
| Cap bolt, rec. tightening torque | 50 | N·m | ||
| Appropriate attachment bolt, size | G | 12 | mm | |
| Appropriate attachment bolt, rec. tightening torque | 80 | N·m | ||
| Initial grease fill, 20% | 40 | g | ||
| Initial grease fill, 40% | 60 | g | ||