Bearings, units and housings -- Bearing housings -- Split plummer block housings, SNL and SE 2, 3, 5 and 6 series -- SNL and SE series for bearings on a cylindrical seat, with standard seals -- SKF SE 213
SE 213
Appropriate products
Dimensions
| da | 65 | mm | |
| db | 75 | mm | |
| Ca | 51 | mm | |
| Da | 120 | mm | |
| Db | 92.5 | mm | |
| A | 110 | mm | |
| A1 | 80 | mm | |
| H | 149 | mm | |
| H1 | 80 | mm | |
| H2 | 30 | mm | |
| J | 230 | mm | |
| L | 275 | mm | |
| N | 24 | mm | |
| N1 | 18 | mm | |
| Dowel pins | |||
| J6 | 252 | mm | |
| J7 | 29 | mm | |
| N4 | max. | 8 | mm |
| Seal dimensions | |||
| A2L | 128 | mm | |
Appropriate seals and end cover
 TSN 213 A
|  2 x TSN 213 S
|  ASNH 516-613
|
Breaking loads, housing
| P0° | 270 | kN | |
| P55° | 340 | kN | |
| P90° | 205 | kN | |
| P120° | 150 | kN | |
| P150° | 130 | kN | |
| P180° | 170 | kN | |
| Pa | 110 | kN |
Yield point, cap bolts
| Q120° | 220 | kN | |
| Q150° | 125 | kN | |
| Q180° | 110 | kN |
Mass
| Mass housing | 7.46 | kg |
Mounting information
| Cap bolt, size | M 12x70 | |||
| Cap bolt, rec. tightening torque | 80 | N·m | ||
| Appropriate attachment bolt, size | G | 16 | mm | |
| Appropriate attachment bolt, rec. tightening torque | 200 | N·m | ||
| Initial grease fill, 20% | 100 | g | ||
| Initial grease fill, 40% | 160 | g | ||