Bearings, units and housings -- Bearing housings -- Split plummer block housings, SNL and SE 2, 3, 5 and 6 series -- SNL and SE series for bearings on a cylindrical seat, with standard seals -- SKF SE 215
SE 215
Appropriate products
Dimensions
| da | 75 | mm | |
| db | 85 | mm | |
| Ca | 56 | mm | |
| Da | 130 | mm | |
| Db | 102.5 | mm | |
| A | 115 | mm | |
| A1 | 80 | mm | |
| H | 155 | mm | |
| H1 | 80 | mm | |
| H2 | 30 | mm | |
| J | 230 | mm | |
| L | 280 | mm | |
| N | 24 | mm | |
| N1 | 18 | mm | |
| Dowel pins | |||
| J6 | 257 | mm | |
| J7 | 29 | mm | |
| N4 | max. | 8 | mm |
| Seal dimensions | |||
| A2L | 133 | mm | |
Appropriate seals and end cover
 TSN 215 A
|  2 x TSN 215 S
|  ASNH 518-615
|
Breaking loads, housing
| P0° | 290 | kN | |
| P55° | 410 | kN | |
| P90° | 250 | kN | |
| P120° | 185 | kN | |
| P150° | 160 | kN | |
| P180° | 205 | kN | |
| Pa | 135 | kN |
Yield point, cap bolts
| Q120° | 220 | kN | |
| Q150° | 125 | kN | |
| Q180° | 110 | kN |
Mass
| Mass housing | 8.09 | kg |
Mounting information
| Cap bolt, size | M 12x70 | |||
| Cap bolt, rec. tightening torque | 80 | N·m | ||
| Appropriate attachment bolt, size | G | 16 | mm | |
| Appropriate attachment bolt, rec. tightening torque | 200 | N·m | ||
| Initial grease fill, 20% | 125 | g | ||
| Initial grease fill, 40% | 210 | g | ||