Bearings, units and housings -- Bearing housings -- Split plummer block housings, SNL and SE 2, 3, 5 and 6 series -- SNL and SE series for bearings on an adapter sleeve, with standard seals -- SKF SE 510-608
SE 510-608
Appropriate products
| Bearing (basic designation) |
2210 K
|
|||
| Adapter sleeve | ||||
| Locating ring |
2 x FRB 9/90
|
|||
Dimensions
| da | 45 | mm | |
| Ca | 41 | mm | |
| Da | 90 | mm | |
| Db | 62 | mm | |
| A | 90 | mm | |
| A1 | 60 | mm | |
| H | 114 | mm | |
| H1 | 60 | mm | |
| H2 | 25 | mm | |
| J | 170 | mm | |
| L | 205 | mm | |
| N | 20 | mm | |
| N1 | 15 | mm | |
| Dowel pins | |||
| J6 | 188 | mm | |
| J7 | 22 | mm | |
| N4 | max. | 6 | mm |
| Seal dimensions | |||
| A2L | 102 | mm | |
Appropriate seals and end cover
 TSN 510 C
|  TSN 510 L
|  TSN 510 A
|  2 x TSN 510 S
|  ASNH 510-608
|
Breaking loads, housing
| P0° | 170 | kN | |
| P55° | 265 | kN | |
| P90° | 155 | kN | |
| P120° | 120 | kN | |
| P150° | 110 | kN | |
| P180° | 130 | kN | |
| Pa | 85 | kN |
Yield point, cap bolts
| Q120° | 150 | kN | |
| Q150° | 85 | kN | |
| Q180° | 75 | kN |
Mass
| Mass housing | 3.83 | kg |
Mounting information
| Cap bolt, size | M 10x55 | |||
| Cap bolt, rec. tightening torque | 50 | N·m | ||
| Appropriate attachment bolt, size | G | 12 | mm | |
| Appropriate attachment bolt, rec. tightening torque | 80 | N·m | ||
| Initial grease fill, 20% | 45 | g | ||
| Initial grease fill, 40% | 70 | g | ||