Bearings, units and housings -- Bearing housings -- Split plummer block housings, SNL and SE 2, 3, 5 and 6 series -- SNL and SE series for bearings on a cylindrical seat, with standard seals -- SKF SNL 206-305
SNL 206-305
Appropriate products
Available SKF Housing Kits
| Housing Kit designation (with V-ring seals) | SNL 22206 TA | |||
Dimensions
| da | 30 | mm | |
| db | 35 | mm | |
| Ca | 32 | mm | |
| Da | 62 | mm | |
| Db | 46.5 | mm | |
| A | 77 | mm | |
| A1 | 52 | mm | |
| H | 89 | mm | |
| H1 | 50 | mm | |
| H2 | 22 | mm | |
| J | 150 | mm | |
| L | 185 | mm | |
| N | 20 | mm | |
| N1 | 15 | mm | |
| Dowel pins | |||
| J6 | 172 | mm | |
| J7 | 19 | mm | |
| N4 | max. | 5 | mm |
| Seal dimensions | |||
| A2L | 89 | mm | |
Appropriate seals and end cover
 TSN 206 A
|  2 x TSN 206 S
|  ASNH 507-606
|
Breaking loads, housing
| P0° | 130 | kN | |
| P55° | 170 | kN | |
| P90° | 100 | kN | |
| P120° | 80 | kN | |
| P150° | 65 | kN | |
| P180° | 85 | kN | |
| Pa | 55 | kN |
Yield point, cap bolts
| Q120° | 150 | kN | |
| Q150° | 85 | kN | |
| Q180° | 75 | kN |
Mass
| Mass housing | 1.9 | kg |
Mounting information
| Cap bolt, size | M 10x40 | |||
| Cap bolt, rec. tightening torque | 50 | N·m | ||
| Appropriate attachment bolt, size | G | 12 | mm | |
| Appropriate attachment bolt, rec. tightening torque | 80 | N·m | ||
| Initial grease fill, 20% | 25 | g | ||
| Initial grease fill, 40% | 40 | g | ||