Bearings, units and housings -- Bearing housings -- Split plummer block housings, SNL and SE 2, 3, 5 and 6 series -- SNL and SE series for bearings on a cylindrical seat, with standard seals -- SKF SNL 217
SNL 217
Appropriate products
Dimensions
| da | 85 | mm | |
| db | 95 | mm | |
| Ca | 61 | mm | |
| Da | 150 | mm | |
| Db | 112 | mm | |
| A | 125 | mm | |
| A1 | 90 | mm | |
| H | 183 | mm | |
| H1 | 95 | mm | |
| H2 | 32 | mm | |
| J | 260 | mm | |
| L | 320 | mm | |
| N | 28 | mm | |
| N1 | 22 | mm | |
| Dowel pins | |||
| J6 | 292 | mm | |
| J7 | 33 | mm | |
| N4 | max. | 8 | mm |
| Seal dimensions | |||
| A2L | 143 | mm | |
Appropriate seals and end cover
 TSN 217 A
|  2 x TSN 217 S
|  ASNH 217
|
Breaking loads, housing
| P0° | 370 | kN | |
| P55° | 480 | kN | |
| P90° | 290 | kN | |
| P120° | 205 | kN | |
| P150° | 190 | kN | |
| P180° | 240 | kN | |
| Pa | 155 | kN |
Yield point, cap bolts
| Q120° | 220 | kN | |
| Q150° | 125 | kN | |
| Q180° | 110 | kN |
Mass
| Mass housing | 9.5 | kg |
Mounting information
| Cap bolt, size | M 12x80 | |||
| Cap bolt, rec. tightening torque | 80 | N·m | ||
| Appropriate attachment bolt, size | G | 20 | mm | |
| Appropriate attachment bolt, rec. tightening torque | 385 | N·m | ||
| Initial grease fill, 20% | 200 | g | ||
| Initial grease fill, 40% | 330 | g | ||