Bearings, units and housings -- Bearing housings -- Split plummer block housings, SNL and SE 2, 3, 5 and 6 series -- SNL and SE series for bearings on a cylindrical seat, with standard seals -- SKF SNL 218
SNL 218
Appropriate products
Dimensions
| da | 90 | mm | |
| db | 100 | mm | |
| Ca | 65 | mm | |
| Da | 160 | mm | |
| Db | 120 | mm | |
| A | 140 | mm | |
| A1 | 100 | mm | |
| H | 194 | mm | |
| H1 | 100 | mm | |
| H2 | 35 | mm | |
| J | 290 | mm | |
| L | 345 | mm | |
| N | 28 | mm | |
| N1 | 22 | mm | |
| Dowel pins | |||
| J6 | 317 | mm | |
| J7 | 35 | mm | |
| N4 | max. | 8 | mm |
| Seal dimensions | |||
| A2L | 158 | mm | |
Appropriate seals and end cover
 TSN 218 L
|  TSN 218 A
|  2 x TSN 218 S
|  ASNH 218
|
Breaking loads, housing
| P0° | 430 | kN | |
| P55° | 550 | kN | |
| P90° | 340 | kN | |
| P120° | 250 | kN | |
| P150° | 215 | kN | |
| P180° | 275 | kN | |
| Pa | 180 | kN |
Yield point, cap bolts
| Q120° | 400 | kN | |
| Q150° | 230 | kN | |
| Q180° | 200 | kN |
Mass
| Mass housing | 11.8 | kg |
Mounting information
| Cap bolt, size | M 16x90 | |||
| Cap bolt, rec. tightening torque | 150 | N·m | ||
| Appropriate attachment bolt, size | G | 20 | mm | |
| Appropriate attachment bolt, rec. tightening torque | 385 | N·m | ||
| Initial grease fill, 20% | 260 | g | ||
| Initial grease fill, 40% | 430 | g | ||