Bearings, units and housings -- Bearing housings -- Split plummer block housings, SNLN 30 series -- SNLN 30 series for bearings on a cylindrical seat -- SKF SNLN 3036
SNLN 3036
Appropriate products
| Bearing | ||||
| Lock nut | ||||
| Locating ring |
2 x FRB 10/280
|
|||
Dimensions
| da | 180 | mm | |
| db | 195 | mm | |
| Ca | 94 | mm | |
| Da | 280 | mm | |
| A | 225 | mm | |
| A1 | 160 | mm | |
| H | 342 | mm | |
| H1 | 170 | mm | |
| H2 | 60 | mm | |
| J | 470 | mm | |
| L | 550 | mm | |
| N | 42 | mm | |
| N1 | 35 | mm | |
| Shaft end | |||
| ba | 69 | mm | |
| bc | 94 | mm | |
| Dowel pins | |||
| J6 | 506 | mm | |
| J7 | 58 | mm | |
| N4 | max. | 12 | mm |
| Seal stand-out | |||
| A2L | 10.5 | mm | |
| A2T | 33.5 | mm | |
Appropriate seals and end cover
 2 x TSN 3036/195 S
|  2 x TNF 3036/195
|  ETS 3036
|
Breaking loads, housing
| P55° | 1160 | kN | |
| P90° | 700 | kN | |
| P120° | 520 | kN | |
| P150° | 460 | kN | |
| P180° | 580 | kN | |
| Pa | 200 | kN |
Yield point, cap bolts
| Q120° | 900 | kN | |
| Q150° | 520 | kN | |
| Q180° | 450 | kN |
Mass
| Mass housing | 58.5 | kg |
Mounting information
| Cap bolt, size | M 24 x 130 | |||
| Cap bolt, rec. tightening torque | 350 | N·m | ||
| Appropriate attachment bolt, size | G | 30 | mm | |
| Appropriate attachment bolt, rec. tightening torque | 1310 | N·m | ||
| Eye bolt, size | M12 | |||
| Initial grease fill, 20% | 950 | g | ||
| Initial grease fill, 40% | 1800 | g | ||