Bearings, units and housings -- Bearing housings -- Split plummer block housings, SONL series -- Split plummer block housings, SONL series for bearings on an adapter sleeve -- SKF SONL 217-517
SONL 217-517
Appropriate products
Dimensions
| da | 75 | mm | |
| Ca | 46 | mm | |
| Da | 150 | mm | |
| A | 163 | mm | |
| A1 | 110 | mm | |
| A2 | 138 | mm | |
| AA | 172 | mm | |
| AB | 180 | mm | |
| d1 | 96 | mm | |
| B1 | 72 | mm | |
| H | 230 | mm | |
| H0 | 283 | mm | |
| H1 | 125 | mm | |
| H2 | 35 | mm | |
| J | 260 | mm | |
| J1 | 60 | mm | |
| L | 330 | mm | |
| N | 28 | mm | |
| N1 | 22 | mm | |
| S | 90 | mm | |
| Shaft end | |||
| ba | 40 | mm | |
| bb | 130 | mm | |
| s2 | 19 | mm | |
| Dowel pins | |||
| J6 | 290 | mm | |
| N4 | max. | 6 | mm |
| Circulating oil lubrication system | |||
| PG | G 3/8 | ||
| P1 | 47.5 | mm | |
| P2 | 40 | mm | |
| RG | G 3/4 | ||
| R1 | 118 | mm | |
| R2 | 22 | mm | |
| O1 | 97 | mm | |
| O2 | 138 | mm | |
Appropriate seals and end cover
| Seal kit for a through shaft |
TSO 517
|
|||
| Seal kit for a shaft end |
TSO 517 A
|
|||
| End cover |
ECO 217-517
|
|||
Breaking loads, housing
| P55° | 690 | kN | |
| P90° | 260 | kN | |
| P120° | 190 | kN | |
| P150° | 180 | kN | |
| P180° | 230 | kN | |
| Pa | 90 | kN |
Yield point, cap bolts
| Q120° | 300 | kN | |
| Q150° | 170 | kN | |
| Q180° | 150 | kN |
Mass
| Mass housing | 26 | kg |
Mounting information
| Cap bolt, size | M 10x75 | |||
| Cap bolt, rec. tightening torque | 50 | N·m | ||
| Appropriate attachment bolt, size | G | 20 | mm | |
| Appropriate attachment bolt, rec. tightening torque | 385 | N·m | ||
| Eye bolt, size |
M 10
|
|||
| Oil level, min. | 48 | mm | ||
| Oil fill, min. | 0.3 | l | ||
| Oil level, max. | 63 | mm | ||
| Oil fill, max. | 0.4 | l | ||