

| da | 60.325 | mm | |
| Da | 130 | mm | |
| Ca | 37.008 | mm | |
| A1 | 79.375 | mm | |
| A2 | 193.675 | mm | |
| S | 3.175 | mm | |
| ba | 32.544 | mm | |
| H | 161.925 | mm | |
| H1 | 82.55 | mm | |
| H2 | 30.163 | mm | |
| L | 285.75 | mm | |
| Threaded holes | |||
| R1 | 46.038 | mm | |
| R2 | 21.431 | mm | |
| RG | 1/4 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 28.575 | mm | |
| Housing |
SSAFS 515
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-15-0
|
|||
| Taconite seal | TER 36 | |||
|
||||
| End plug (suffix Y) |
EPR 7
|
|||
| Max. speed for Taconite seal | 1250 | r/min |

| P60° | 75.6 | kN | |
| P90° | 45.4 | kN | |
| P120° | 28 | kN | |
| P150° | 25.4 | kN | |
| P180° | 30.2 | kN | |
| Pa | 6.94 | kN |
| Mass pillow block | 14.3 | kg |
| Cap bolt |
2 x 1/2-13 UNC
|
|||
| Cap bolt recommended tightening torque | 102 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Initial grease fill | 68.04 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 25x48x8 CRW1 V | ||||
|---|---|---|---|---|
| 7319 BECBY | ||||
| H 3140 | ||||
| NJ 221 ECJ | ||||
| SYFWK 15/16 LTA |
Hot number:
15915
25x52x8 HMS5 V
4938
61803-2RZ
6370
7419 GAM
C 30/600 KM
K 52x57x12
NA 4906 RS
RLS 24
SAF 1613 TLC
SAF 1617 x 2.13/16 TLC
SD 40x47x4
SNW 109x1.7/16
SYK 507
Previous:SSAFS 22515 x 2.3/8 Bearings, units and housings ---- Next:SSAFS 22515 x 2.3/8 TLC Bearings, units and housings
Return to SKF bearing