

| da | 161.925 | mm | |
| Da | 319.999 | mm | |
| Ca | 95.809 | mm | |
| A1 | 180.975 | mm | |
| A2 | 254 | mm | |
| S | 4.763 | mm | |
| ba | 75.406 | mm | |
| H | 377.825 | mm | |
| H1 | 190.5 | mm | |
| H2 | 76.2 | mm | |
| L | 679.45 | mm | |
| Threaded holes | |||
| R1 | 114.3 | mm | |
| R2 | 41.275 | mm | |
| RG | 3/4 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 60.325 | mm | |
| Housing |
SSAFS 536
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-36-30
|
|||
| Labyrinth ring |
2 x LOR 147
|
|||
|
||||
| End plug (suffix Y) |
EPR 19
|
|||
| Bearing limiting speed | 2600 | r/min |

| P60° | 234 | kN | |
| P90° | 140 | kN | |
| P120° | 84.5 | kN | |
| P150° | 75.6 | kN | |
| P180° | 89 | kN | |
| Pa | 46.3 | kN |
| Mass pillow block | 197 | kg |
| Cap bolt |
4 x 3/4-10 UNC
|
|||
| Cap bolt recommended tightening torque | 359.3 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 3/8-16 UNC
|
|||
| Initial grease fill | 1304.1 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 511/670 F | ||||
|---|---|---|---|---|
| 91303 | ||||
| NATV 15 | ||||
| SYR 1 7/16-3 | ||||
| SE 210 |
Hot number:
2205 E-2RS1KTN9
239/900 CAK/W33
28751
28x47x7 HMSA10 RG
317-Z
400030
37525
80x110x12 HMS5 RG
BA1B 311576
FSAF 1314
FSAF 1616 x 2.3/4
H 207
H 715345/311
NU 211 ECML
SAF 23024 KA x 4.1/8
Previous:SSAFS 22536 x 6.1/2 TLC Bearings, units and housings ---- Next:SSAFS 22536 x 6.3/8 T Bearings, units and housings
Return to SKF bearing