

| da | 201.613 | mm | |
| Da | 399.999 | mm | |
| Ca | 117.805 | mm | |
| A1 | 222.25 | mm | |
| A2 | 368.3 | mm | |
| S | 4.763 | mm | |
| ba | 90.487 | mm | |
| H | 473.075 | mm | |
| H1 | 241.3 | mm | |
| H2 | 95.25 | mm | |
| L | 831.85 | mm | |
| Threaded holes | |||
| R1 | 130.175 | mm | |
| R2 | 46.831 | mm | |
| RG | 1 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 79.375 | mm | |
| Housing |
SSAFS 544
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-44-38
|
|||
| Taconite seal | TER 167 | |||
|
||||
| End plug (suffix Y) |
EPR 23
|
|||
| Max. speed for Taconite seal | 385 | r/min |

| P60° | 423 | kN | |
| P90° | 254 | kN | |
| P120° | 160 | kN | |
| P150° | 145 | kN | |
| P180° | 173 | kN | |
| Pa | 71.2 | kN |
| Mass pillow block | 365 | kg |
| Cap bolt |
4 x 1-8 UNC
|
|||
| Cap bolt recommended tightening torque | 799.9 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 1/2-13 UNC
|
|||
| Initial grease fill | 2749.95 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 16002-Z | ||||
|---|---|---|---|---|
| 38x72x10 HMS5 V | ||||
| HA 2340 L | ||||
| SAFS 23056 KA x 10.7/16 | ||||
| S7018 CB/P4A |
Hot number:
15209
33014T108.8/DB
38x55x8 HMSA10 RG
400200
4210 ATN9
52447
6330/HC5C3S0VA970
728 ACD/P4A
FSAF 22615
K 18x24x20
KM 40
OKC 410
S7010 FW/HC
SAF 22230 T
W 638-2RZ
Previous:SSAFS 22544 Bearings, units and housings ---- Next:SSAFS 22544 TLC Bearings, units and housings
Return to SKF bearing