| Material | Cast iron | |||



| d | 60 | mm | |
| A | 70 | mm | |
| A1 | 49 | mm | |
| B1 | 65 | mm | |
| H | 150.5 | mm | |
| H1 | 76.2 | mm | |
| H2 | 27 | mm | |
| J | 203 | mm | |
| J | max. | 213 | mm |
| J | min. | 193 | mm |
| L | 265 | mm | |
| N | 35 | mm | |
| N1 | 25 | mm | |
| s1 | 35.4 | mm | |
|
Values for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 5.5 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 241 | mm | |
| J7 | 23 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 57.2 | kN | |
| Basic static load rating | C0 | 40 | kN | |
| Fatigue load limit | Pu | 1.7 | kN | |
| Limiting speed | 3000 | r/min |
| Mass bearing unit | 6.25 | kg |
| Appropriate spanner | HN 12-13 | |||
| Recommended lock nut tightening angle | a | 100 | ° | |
| Recommended diameter for attachment bolts, mm | G | 20 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.75 | in | |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 24048 CC/W33 | ||||
|---|---|---|---|---|
| 248/1500 CAFA/W20 | ||||
| 7001 ACD/P4AH | ||||
| 76215 | ||||
| NU 211 ECM |
Hot number:
30125
30313 R
316189
51272 F
627
6332 M
7016 CD/P4A
7311 BECBJ
FY 1.7/16 DTF
H 2330 L
LS 0619
NNU 4940 BK/SPW33
OH 39/530 HE
S7024 ACE/HCP4A
SAF 1511 T
Previous:SYJ 60 KF Bearings, units and housings ---- Next:SYJ 65 TF Bearings, units and housings
Return to SKF bearing