Bearings, units and housings -- Bearing units -- Roller bearing units -- Metric roller bearing units, SYNT and FYNT series (SKF ConCentra) -- Roller bearing plummer block units, for metric shafts SKF SYNT 35 F
SYNT 35 F
Dimensions
| da | 35 | mm | |
| A | 60 | mm | |
| B | 65 | mm | |
| H | 111 | mm | |
| H1 | 60 | mm | |
| H2 | 25 | mm | |
| J | 170 | mm | |
| L | 205 | mm | |
| N | 20 | mm | |
| N1 | 15 | mm | |
| Shaft end | |||
| A3 | 50 | mm | |
| A5 | 22 | mm | |
| ba | min. | 34 | mm |
| ba | max. | 43 | mm |
| Dowel pins | |||
| J6 | 185 | mm | |
| J7 | 21 | mm | |
| N4 | max. | 6 | mm |
Calculation data
| Basic dynamic load rating | C | 86.5 | kN | |
| Basic static load rating | C0 | 85 | kN | |
| Fatigue load limit | Pu | 9.3 | kN | |
| Limiting speed | 4100 | r/min | ||
| Calculation factor | e | 0.31 | ||
| Calculation factor | Y1 | 2.2 | ||
| Calculation factor | Y2 | 3.3 | ||
| Bearing mean diameter | dm | 53.5 | mm | |
| Basic bearing designation | ||||
Load carrying ability
| Breaking loads | |||
| P0° | 150 | kN | |
| P55° | 250 | kN | |
| P90° | 150 | kN | |
| P120° | 95 | kN | |
| P150° | 85 | kN | |
| P180° | 105 | kN | |
| Axial holding power | |||
| Pa | 15 | kN | |
Mass
| Mass bearing unit | 3.8 | kg |
Mounting information
| Attachment bolt diameter | G | 12 | mm | |
| Tightening torque for attachment bolts | 80 | N·m | ||
| Grub screws |
3 x M 6
|
|||
| Tightening torque for grub screws | 8 | N·m | ||
| Grease quantity for relubrication | 3 | g | ||
Appropriate products
| End cover | ||||