| Housing material | Cast iron | |||


| d | 30 | mm | |
| A | 37 | mm | |
| A1 | 12 | mm | |
| A2 | 28 | mm | |
| B | 38.1 | mm | |
| H | 104 | mm | |
| H1 | 89 | mm | |
| H2 | 56 | mm | |
| L | 114 | mm | |
| L1 | 70 | mm | |
| L2 | 10 | mm | |
| L3 | 57 | mm | |
| N | 22 | mm | |
| N1 | 16 | mm | |
| N2 | 37 | mm | |
| s1 | 22.2 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 3.5 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 19.5 | kN | |
| Basic static load rating | C0 | 11.2 | kN | |
| Fatigue load limit | Pu | 0.475 | kN | |
| Limiting speed with shaft tolerance h6 | 6300 | r/min |
| Mass bearing unit | 1.2 | kg |
| Grub (set) screw | G2 | M6x0.75 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Housing | ||||
| Bearing | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 190x220x12 HMS5 V1 | ||||
|---|---|---|---|---|
| 32315 | ||||
| 470416 | ||||
| 7308 BECBY | ||||
| BEAS 017047-2RZ |
Hot number:
11071
23280 CA/W33
24144 CC/W33
31316/DF
6003-2RSH
7216 BECBJ
BT4-8113 E2/C500
NU 1016 ECM
NUH 2320 ECMH
PRMF 303430
PWM 657560
SAF 22228
SAFS 23028 KAT x 4.13/16
SAKAC 20 M
SAW 23544 x 7.13/16
Previous:TUJ 25 TF Bearings, units and housings ---- Next:TUJ 35 TF Bearings, units and housings
Return to SKF bearing