Bearings, units and housings -- Bearing housings -- Split plummer block housings, SNL 30, 31 and 32 series -- Large SNL series for bearings on a cylindrical seat, with standard seals -- SKF SNL 3192 G
SNL 3192 G
Appropriate products
| Bearing (basic designation) |
23192
|
|||
| Lock nut | ||||
| Lock washer | ||||
| Locating ring |
2 x FRB 10/760
|
|||
Dimensions
| da | 460 | mm | |
| db | 500 | mm | |
| d2 | 645 | mm | |
| Ca | 260 | mm | |
| Da | 760 | mm | |
| A | 470 | mm | |
| A1 | 440 | mm | |
| ATS | 480 | mm | |
| ATK | 600 | mm | |
| H | 880 | mm | |
| H1 | 440 | mm | |
| H2 | 145 | mm | |
| J | 1070 | mm | |
| J1 | 260 | mm | |
| L | 1280 | mm | |
| N | 60 | mm | |
| N1 | 48 | mm | |
| s | 35 | mm | |
| Shaft end | |||
| ba | min. | 220 | mm |
| ba | max. | 243 | mm |
| bb | 215 | mm | |
| bc | 248.5 | mm | |
| Dowel pins | |||
| J6 | 1160 | mm | |
| N4 | max. | 40 | mm |
Appropriate seals and end cover
| Labyrinth seal |
2 x TS 530
|
|||
| Taconite seal |
2 x TK 30/530
|
|||
| End cover |
ETS 530
|
|||
Breaking loads, housing
| P0° | 8400 | kN | |
| P55° | 10700 | kN | |
| P90° | 5200 | kN | |
| P120° | 3800 | kN | |
| P150° | 3300 | kN | |
| P180° | 4200 | kN |
Yield point, cap bolts
| Q120° | 5800 | kN | |
| Q150° | 3350 | kN | |
| Q180° | 2900 | kN |
Mass
| Mass housing | 850 | kg |
Mounting information
| Cap bolt, size | M 42x300 | |||
| Cap bolt, rec. tightening torque | 850 | N·m | ||
| Appropriate attachment bolt, size | G | 42 | mm | |
| Appropriate attachment bolt, rec. tightening torque | 3640 | N·m | ||
| Eye bolt, size |
2 x M 48
|
|||
| Initial grease fill, 20% | 12 | kg | ||
| Initial grease fill, 40% | 17.5 | kg | ||