

| da | 127 | mm | |
| Da | 210 | mm | |
| Ca | 72.619 | mm | |
| A1 | 120.65 | mm | |
| A2 | 255.588 | mm | |
| ba | 53.975 | mm | |
| H | 257.175 | mm | |
| H1 | 133.35 | mm | |
| H2 | 53.975 | mm | |
| L | 419.1 | mm | |
| Threaded holes | |||
| R1 | 79.375 | mm | |
| R2 | 30.163 | mm | |
| RG | 1/2 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 46.038 | mm | |
| Housing |
SSAFS 028 KA
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
2 x 36053-50
|
|||
| Taconite seal | TER 123 | |||
|
||||
| End plug (suffix Y) |
EPR 27
|
|||
| Max. speed for Taconite seal | 625 | r/min |

| P60° | 185 | kN | |
| P90° | 111 | kN | |
| P120° | 72.5 | kN | |
| P150° | 66.7 | kN | |
| P180° | 81.4 | kN | |
| Pa | 22.2 | kN |
| Mass pillow block | 61.2 | kg |
| Cap bolt |
4 x 1-8 UNC
|
|||
| Cap bolt recommended tightening torque | 1220 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Eye bolt |
2 x 3/8-16 UNC
|
|||
| Initial grease fill | 379.89 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 47481 | ||||
|---|---|---|---|---|
| 6321-Z | ||||
| PCZ 0808 E | ||||
| SAF 1618 x 3.1/8 T | ||||
| SNP 3180x14.15/16 |
Hot number:
155x180x15 HMS5 V
16338
BD-24168 ECCK30J/W33-AOH 24168
22340 CCJA/W33VA405
294/670 EM
38x55x10 HMSA10 V
471901
50x72x8 HMS5 RG
7536
BD-C 3132 K-H 3132 L
OKF 560
SAFS 22516-11 x 2.5/8 T
SSAFS 22516 x 2.3/4 TLC
W 61816-2RS1
Z 204
Previous:SSAFS 23028 KAT x 4.7/8 Bearings, units and housings ---- Next:SSAFS 23028 KATLC x 4.13/16 Bearings, units and housings
Return to SKF bearing