| Housing material | Cast iron | |||


| d | 50 | mm | |
| d2 | 72 | mm | |
| A | 43 | mm | |
| A1 | 15 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 29.5 | mm | |
| B1 | 46 | mm | |
| Da | H11 | 101.6 | mm |
| Db1 | 107 | mm | |
| Db2 | 116 | mm | |
| J | 157 | mm | |
| H | 189 | mm | |
| L | 116 | mm | |
| N | 18 | mm | |
| s1 | 27.5 | mm | |
| T | 55.5 | mm | |
|
Values for B1 and s1 before the grub screw is tightened (sleeve and inner ring bore at starting position). |
|||
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 28.5 | mm | |
| Ra | 45 | ° | |
| Dowel pins | |||
| J6 | 127 | mm | |
| J7 | 20 | mm | |
| N4 | 2 | mm | |
| Basic dynamic load rating | C | 35.1 | kN | |
| Basic static load rating | C0 | 23.2 | kN | |
| Fatigue load limit | Pu | 0.98 | kN | |
| Limiting speed | 800 | r/min |
| Mass bearing unit | 2.05 | kg |
| Thread grub screw | G2 | M6 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 7.4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 16 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.625 | in | |
| Appropriate SKF mounting kit | 626830 | |||
| Housing |
FYTB 510 M/VZ033
|
|||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 6032 | ||||
|---|---|---|---|---|
| 98x120x12 CRW1 V | ||||
| FY 1.3/16 TF/VA201 | ||||
| H 317 E | ||||
| K 45x50x27 |
Hot number:
22232 CCK/W33
23228-2CS5/VT143
524853
65x120x12 HMSA10 RG
86013
BK 1412
FSYE 2 1/2-3
FY 1.15/16 TDW
FYTB 50 TDW
NUP 220 ECP
SAF 1618 x 3.1/8 T
SAFS 22640 x 7.1/4
SAFS 23056 KATLC x 10
W 61909 R
W 637-2RS1
Previous:FYTB 50 FM Bearings, units and housings ---- Next:FYTB 50 LF Bearings, units and housings
Return to SKF bearing